How To Install Flat Screen Tv Over Brick Fireplace

When mounting a apartment screen television receiver to a higher place a fireplace, the completed project volition enhance the viewing feel while updating the expect of a room.

ANCHORING A TV OVER A FIREPLACE

Precautions must be considered to ensure that the oestrus doesn't damage the TV. Before installation, experiment with thermometers to brand sure that the temperatures generated past the fireplace during normal employ are within the heat guidelines in the user transmission. Anchoring a flat Idiot box above a fireplace is normally harmless with the appropriate distance and proper ventilation.

Before You Go Started

The proper wall mount must exist called from the variety of sizes and styles specific to the type of display. Screen height, every bit well as electronic specifications, must also be considered. When unsure of the best wall mount, contact a professional electrician or telly installer.

Tools Required:

· Safety Goggles

· Marker / Pencil

· Level

· Hammer Drill

· Standard Drill

· Drill Chip

· Wrench

· Shop-Vac or Wire Brush

· The adjacent footstep is to select the appropriate anchoring system to mount the television. There are a number of different types ofconcrete fasteners that tin be used to anchor the mounting brackets to brick, block, or mortar. Using aConcrete Sleeve Anchor orTapcon® Concrete Screws may provide the most consistent holding values in a variety of base materials. The holding value is dependent on thebore of the anchor anddepth of embedment.

· When anchoring into brick, it is sometimes necessary to anchor to the mortar joint, depending on where the holes in the bracket line-up. Mortar can exist an excellent base material to better belongings values but volition depend on the quality and quantity of the mortar in the articulation. Anchoring into brick only will also work in some applications.

· Make up one's mind the type, size and number of concrete fasteners needed.

Stride past Step Instructions

Sleeve Anchors

Concrete Sleeve Anchors tin exist installed in a few steps. Basic instructions follow:

Helpful Hint:
Make certain the diameter of the ballast used will fit correctly through the holes in the subclass/wall mountain.

· Cutting out and install the wall-boxes that you will use for cabling.

· Using a level, make up one's mind the desired height of the display. Next, attach the mount to the brick fireplace.

· Using a hammer drill, drill a hole (the aforementioned diameter as the ballast diameter) using a carbide-tipped masonry bit.

· Clear the pigsty of all droppings using compressed air, a shop-vac or wire castor

· Insert theSleeve Anchor into the hole and make sure information technology is secure and positioned correctly. Continue to insert each anchor into the correct bracket.

· Position the mountain in the desired position. Tighten all nuts to ensure the mount is secure.

· Carefully hang the flat screen to the mount, making sure to bank check that any safety tabs are in place for extra security.

Tapcon Concrete Screw

The installation of aTapcon® Concrete Screw is as well straightforward:

Tech Tip:
1/iv" diameter Tapcons employ a 3/16" chip and iii/16" bore Tapcons use a 5/32" bit.

· Cut out and install the wall-boxes that will exist used for cabling.

· Attaching the mountain to the brick fireplace is the next step. Using a level, determine the desired height of the brandish before attempting to install the wall mount.

· Using a hammer drill, drill holes using the right diameter carbide-tipped masonry bit for theconcrete screw diameter in use.

· Clear the hole of debris.

· Position the mountain in the verbal position. Drive the screw into the hole with a standard drill and continue until all brackets are firmly in place.

· Carefully hang the apartment screen television to the mount, checking to ensure that prophylactic tabs are in place for extra belongings.